Product diagram
Note: This is only for reference, it can be different from different models. All
rights reserved.
ndicador light
On/Off switch
Air outlet
Front case
Back cover
Opera�on
1.Use AC power supply. Install the water tank in to the dehumidifier; plug the
DC plug into the DC port of the appliance and the adaptor in to the socket
outlet. The power light will turn on (blue) and the fan will con�nuously run.
2.If the red indicator lights on, please check, if the water tank is in correct
posi�on.
3.This dehumidifier will stop the dehumidifica�on automa�cally, if the water
reaches the level and the red indicator will turn on, which means the water
tank is full. Please cut off the power supply, before you take out the tank.
Remove the black drain cover of the water tank and discard the collected
water. Then replace it.
4. Wipe and dry the water tank and the dehumidifier.
8
Summary of Contents for Bree-Care BMZ-12M
Page 11: ...148 210mm...