M&S Systems MC702 Owner'S Manual Download Page 9

17

ROOM LISTEN function (all listen)

Monitoring rooms

M

ONITORING OTHER ROOMS

Room station monitoring is useful for constant monitoring of small children and
those requiring special care. Any station in which you wish to monitor should be
set to the MONITOR position on the room switch panel. The result of the combined
monitored stations will be broadcast to any station set to ON at the room switch
panel.  Non-RS room stations that have the PRIVACY feature enabled cannot be
monitored regardless of the room switch setting at the room switch panel. The
MC702 is designed to prevent the door chime from ringing at stations set to the
MONITOR position at the room switch panel. This will prevent disturbing the
occupants of the monitored rooms.

C

OMMUNICATING WITH DOOR LOCATIONS

The MC702 features two way intercom to the door locations. With the MC702 you
need not risk unwanted intrusion by opening the door to respond to the door bell.
To communicate with the visitor, depress both ROOM TALK and ROOM LISTEN
buttons and speak. To hear the response from the visitor, simply release BOTH
buttons. This will automatically switch the system to DOOR LISTEN mode.
Pressing both ROOM TALK and ROOM LISTEN  again allows you to again talk to
the visitor.  The DOOR LISTEN function will automatically time out in about 20
seconds or when you momentarily depress ROOM LISTEN or ROOM LISTEN by
itself.

18

Talking to the door stations

Listening to the door stations

TROUBLESHOOTING

M&S Systems products are designed for years of reliable service. If you encounter
any problems with your system review this operating guide again.  Your installer
or dealer can charge you for a service call to come to your home and show you
how to operate your system. Most problems are caused by  incorrect setup,
improper adjustment and incorrect operation and can be corrected by following the
instructions in this operating guide.  The table below should assist in
troubleshooting your problem. If after reviewing this operating guide and are
unable to resolve the problem contact your installer/dealer or technical service at
(800) 366-9422.

PROBLEM

WHAT TO CHECK

Problem - What to check

System squeals when
ROOM TALK or ROOM
LISTEN is depressed

INTERCOM level is set too high at the master
location. Reduce the INTERCOM level.

Radio turns on by itself

Check for AUTO operation. If the display shows
'AUTO', turn off the AUTO feature. If the AUTO
feature is being enabled inadvertently, program a
more suitable AUTO ON/AUTO OFF to prevent
being disturbed by AUTO ON activation.

Can't get more than one
wireless remote control
transmitter to work.

The working transmitter's identification has
overwritten the other  transmitters. Reprogram all
transmitters making sure to depress a different
button on each transmitter. (see 'Setting up the
MCTX wireless remote control')
Check batteries - replace batteries if necessary

Cannot monitor rooms

Check the monitored room stations and ensure
that the PRIVACY switches are off and the
volume controls are turned up (clockwise).

Summary of Contents for MC702












Reviews: