11
Exiting TEST mode or 'RESETTING' the
MC702
NOTE: Pressing the same button on two different
transmitters will automatically overwrite the
previous transmitter stored in memory. Always
MUSIC OPERATION
the respectively instead of the TUNING UP button on the TRANSMITTER.
To exit the TEST mode, press the
VOLUME UP and POWER buttons at
the same time and then release.
C
ONTROLS
LCD DISPLAY
- This back lighted
1
readout indicates: current time,
auto radio on/off status, radio
station frequency, station memory
setting, and active intercom status.
This display also shows diagnostic
codes when the TEST mode is
enabled.
UP/DOWN BUTTONS
- These
2
buttons are used to scan through
FM or AM radio stations.
1, 2, 3, and 4 BUTTONS
- These
3
12
NOTE: The VOLUME UP/DOWN, TUNING UP/DOWN and SOURCE select
buttons are duplicated on the wireless remote control transmitters.
buttons are used to save and
recall your most frequently used
FM and AM radio stations.
VOLUME UP/DOWN BUTTONS
-
4
These buttons are used to
increase and decrease the overall
system radio volume.
POWER ON/OFF BUTTON
- This
5
button is used to turn the MC702
music source ON and OFF.
Note:
The intercom is always on!
AUTO button
- This button is used
6
to turn the Automatic Music (AUTO
*
) function ON and OFF.
TIME/AUTO SET BUTTON
- This
7
button is used to access the time
setting mode.
SOURCE button
- This button is
8
used to select the audio source
(FM A, FM B, AM A, AM B, AUX
input, or TAPE input).