background image

12

MC602 ROOM SPEAKER OPERATION

19.

ROOM SPEAKER/MICROPHONE

 

 High-Fidelity Speaker.  This also is

the microphone for communications from the room.

20.

ROOM TALK button

 - 

always active.  This button is used for talking to the

other rooms and to the master.  To talk to other rooms and the master hold the ROOM
TALK button in while talking in the direction of the microphone.  Release the ROOM
TALK button when you are finished talking.

NOTE:  

When talking to a person in another room, you will be heard at each speaker

that is in the RAD/INT, or INT position (See section 18).

13

21.

ROOM LISTEN button

 - 

always active.  This button is used for listening to

the other rooms and the master.  To listen to other rooms and the master hold the
ROOM LISTEN button in.  Release the ROOM LISTEN button when you are finished
listening.  

NOTE:  

To get the maximum benefit from this Hands Free system, make it a house

rule that whoever initiates a call will always follow up by pressing the ROOM LISTEN
button.  This allows someone to respond to the call without getting up or stopping their
current activities.

NOTE:  

When listening to other rooms, you will hear each speaker including the

master that is in the MONITOR, RAD/INT, or INT position (See section 18).

20 & 21. 

DOOR TALK

 - 

always active.  These buttons are used for communicating

with the outside door speaker(s).  To talk to someone at the door speaker(s) hold the
ROOM LISTEN and ROOM TALK buttons in while talking in the direction of the
microphone.  Release the ROOM LISTEN and ROOM TALK buttons when you are
finished talking--the MC602 will automatically listen (you will hear what is being said)
to the person at the door(s) for approximately 25 seconds.  You may talk to the
person at the door again anytime by holding in the ROOM LISTEN and ROOM TALK
buttons.  Each time the buttons are released, the door speaker(s) can be listened to
for another 25 seconds.  If you are done communicating with the person at the door
and/or you do not want to listen to the door speaker, the 25 second listening time can
be canceled by momentarily pressing either the ROOM LISTEN or the ROOM TALK
button by itself.

NOTE: 

 When communicating with the person at the door(s), both sides of the

conversation will be heard at each speaker including the master that is in the
RAD/INT, or INT position (See section 18).

22.

ROOM SPEAKER VOLUME CONTROL - Recommended setting:

Maximum.  

This CONTROL is used to control the volume of the ROOM SPEAKER. 

Turning the ROOM SPEAKER VOLUME CONTROL clockwise increases the ROOM
SPEAKER volume and turning it counter-clockwise decreases the ROOM SPEAKER
volume.  The ROOM SPEAKER VOLUME CONTROL should normally be set to
maximum (fully clockwise) and the VOLUME UP and DOWN buttons (See section 10
& 11) should be used to adjust for the proper listening volume.  

NOTE:  

The ROOM SPEAKER VOLUME CONTROL can be used to prevent others

from monitoring the room that you are in by turning the VOLUME CONTROL fully
counter-clockwise.  Just remember that you will not hear the intercom or door chime
with the VOLUME CONTROL in this position!

Summary of Contents for MC602













Reviews: