2
In addition, your new musical intercom also features:
*Smart Chime which will not interfere with Door Communications
*Lightning, static, and surge protection
*Improved reliability and serviceability
Your MC602 is designed to make your home more functional and enjoyable. Prepare
yourself for a more satisfying home living experience.
MC602 MASTER UNIT OPERATION
When the MC602 is first connected to 120V house power the unit will set itself to
12:00 AM and the time will flash. The flashing display indicates that power has been
applied to the unit for the first time or that there has been an extended power outage
and the unit has lost its memory. The unit will operate properly and keep time from
this initial 12:00 AM setting, but it should have its memory restored by performing
sections 4, 5 and 9 in the following instructions:
1.
MASTER SPEAKER/MICROPHONE
High-Fidelity Speaker. This also is the
microphone for communications from the master unit.
2.
DISPLAY
Easy to read and understand Liquid Crystal Display with
backlight. The display normally functions as a clock or frequency readout for AM and
FM, but the display can also show additional important information. This other
3
Display
Display
information is explained under the function with which it is associated.
3.
POWER button
- This button is used to turn the MC602 ON and OFF. When
the unit is turned on, one of the four source indicators (AM, FM, AUX, or TAPE) on the
right side of the display will be SHOWN. When the unit is off, all four of these
annunciators will be off. The MC602 must be turned on to operate the radio, or to
listen to other music through the unit. Setting the times and auto
*
functions as well
as all intercom functions will work with the power ON or OFF.
4.
AUTO
*
*
*
*
button
- This button is used to turn the Automatic Music (AUTO
*
)
function ON and OFF. Pressing the AUTO
*
button momentarily, turns the function
ON and pressing it again turns it OFF. The AUTO
*
function is ON when the AUTO
indicator is displayed on the top of the display. When the AUTO
*
function is turned
on, the MC602 will turn itself ON Automatically when the current time reaches the
Automatic ON TIME and then turn itself OFF when the current time reaches the
Automatic OFF TIME. When the MC602 automatically turns itself ON it
will always
turn on at the same volume level.
This "AUTO ON VOLUME LEVEL" has a default
of 6 (See Sections 10 & 11) but it can be changed following these simple steps:
A.
Turn the MC602 ON.
B.
Momentarily press the VOLUME UP and AUTO
*
buttons at the
same time. Release both buttons.
C.
The display will show the letter "A" for AUTO ON VOLUME followed
by a number. This number is the volume of the music currently
playing and this will be the volume of the MC602 when it
automatically turns ON.
D.
This AUTO ON VOLUME can be changed by using the VOLUME
UP & DOWN buttons.
E.
When you have the volume at the level that you want the MC602 to
automatically turn on to, do not press any buttons for 9 seconds.
The display will go back to normal and the new AUTO ON VOLUME
will be
saved.
