dmc1CD
Installation Instructions
2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 |
www.mssystems.com
Page
3
Installing the dmc1CD
The finish out installation of the dmc1CD should be made after the
application of wall covering material. These instructions should be
used in conjunction with the dmc1 master unit’s finish out
instructions. The dmc1CD should be installed prior to the finish out
of the dmc1 master.
Tools required:
•
#2 Phillips
screwdriver
Connect the audio
cables to the audio
outlets of the dmc1CD
player. Note: These
cables will be
connected to the dmc1
master upon finish-out
of the master. The
audio cables are
shipped with the
dmc1HC wall housing.
After connecting the audio
cables connect the power
cord from the TE2C transformer to the power connector on the
dmc1CD.
Ensuring that nothing is between the CD player and the back of the
wall housing (including cables), place the dmc1cd player into the
lower opening of the dmc1F frame. Use the screws provided to
secure the unit in place.
Follow the instructions provided with the dmc1 master to complete
the finish-out of the system.
Figure 1 - dmc1CD wiring connections
