12
1.8 Product information
The nameplate including product name, part number and serial number is
attached to the back of the product. Please note these data in the operating
manual.
Product name
Part number
Purchase date
2.0 WELDING
2.1 Set up of the mandrels that need to be welded
• Recommendation: Heating up the mandrels to room temperature to achieve the
best welding result.
• Cut the ends of the mandrel to be connected flat.
• Fix the mandrel in the guide clamp FZ01 or FZ02/3 and align the ends.
Summary of Contents for EErgo
Page 18: ...18...
