18
M&R Companies 440 Medinah Rd. Roselle, IL 60172 USA
Tel: +630-858-6101 Fax: +630-858-6134
V.113017
5.2.2 Exposing With the Control Screen
1.
The screen is on when power is supplied to the unit. Touch the screen to activate the
Main
screen.
2.
After unlatching the blanket frame assembly, the
Frame Open
screen displays. Press
INSPECT ON
to
turn on inspection lights to check screen location or for any screen imperfections. Press
INSPECT OFF
to turn off inspections lights.
Note: The LED lights will not display when the frame is opened.
3.
On the
Main
screen, press the data entry cell for
VAC TIME
and
EXP TIME
and enter times as required
on the keypad and press
ENT
. To save the vacuum and exposure time parameters to memory, refer to
Saving and Recalling Jobs in this manual.
4.
Press
START
to start vacuum pump and exposure process. The screen displays
EXPOSING
and
counts down
during the vacuum and LED exposure times and then changes to
EXPOSURE
COMPLETE
after the screen is finished. Unlatch the blanket frame assembly and slowly raise it to the
load/unload position and remove the screen.
Note: Press
STOP
to stop the vacuum or exposure at any time.
Summary of Contents for Starlight 2331
Page 1: ...Starlight Ev1 Part MAN STARLIGHT 95 00 USD V 113017 ...
Page 2: ......
