English
F-7
Battery and charging
How to check the charging status
17
A new way of moving
16
1. How to check the charging status
1) Indication by the charging lamp
2. Troubleshooting
1) Power LED is not ON
- Check if AC power is ON and if the power cord is plugged properly.
2) Red LED is not ON while charging the battery
- Check if the charger port is properly plugged.
3) Red LED does not change to green LED while charging the battery
- Check whether the room temperature is at the optimal temperature. If red
LED is still ON at the optimal temperature, it indicates that the battery has
a failure - contact the store.
4) Red LED changes to green instantly
- It indicates that the battery is fully charged. Otherwise, it indicates that the
battery has a failure - contact the store.
5) Green LED is ON even though the battery is not fully charged
- Repeat recharging the battery after completely discharging 2~3 times. If
you still have the same problem, contact the store.
Even though charging may begin normal-
ly, it may be discontinued when the bat-
tery temperature exceeds the possible
charging temperature in order to protect
the battery. In this case, cool down the
battery and charge the battery again at
a cooler place
Despite the battery is at between 0~
30°C, if the battery is charged at a place
exposed to direct sunlight or directly after
a ride, charging cannot be initiated
because the interior temperature of the
battery is out of the possible charging
temperature range.
G
How to use the
product properly
2A General
Charger
4A High-speed charger
Left Lamp
Right Lamp
Power Off
Off
Off
Off
Standby
Red
Red
Off
In Progress
Red
Red
Red
Completed
Green
Red
Green
F-8
Time to Charge
Using a general charger, it usually takes about 5.5 hours when the
battery icon on the HMI screen is completely empty (it takes about 3
hours when using a high-speed charger, sold separately).
* The time to fully charge a battery varies with the condition of the battery and the room temperature.
If you find any problem while charging a
battery, turn off the power of the charger
immediately, disconnect the charging
plug of the charger from the product, and
unplug the power cord from an electric
outlet.
* Charging a battery that has not been
used for a long period of time may
take longer and as long as the red
LED is ON, you may consider it as
working properly.
Mando Footloose user manual
1. Safety tips: for safe riding, safety equipments required. Be
aware of the safety requirements (including the NATIONAL
TRAFFIC LAWS) and follow them.
1) Wear a helmet that meets the safety code. Follow the steps, instructions
and suggestions stated in the user manual.
2) Conduct a safety inspection with a specialist regularly.
3) Practice the operation of the product including pedaling, handling, braking
and throttling in advance.
4) Wear a pair of comfortable shoes. A lose cloth might get caught by the
product. Do not wear sandals or pedal with bare feet when riding the
product.
5) Use lights and wear bright colors so pedestrians or car drivers can notice
you when riding Mando Footloose at night.
6) Protect your eyes by wearing sunglasses when the sunlight is strong.
7) Wear safety equipment and use lights to meet local traffic laws.
8) Do not perform any stunts while riding. Stunts and dangerous actions can
bring instant excitement, but it may harm the product or cause injuries.
9) Operate the product at the appropriate speed depending on the circum-
stances. Higher speeds may increase danger.
10) The maximum weight of a rider for this product is 100 kg (including
personal belongings).
2. Motor and Alternator
1) Ensure that the number of pedal rotations do not exceed 90 times per
minute (Excessive rotations may cause a damage due to overheat).
2) Do not use high pressure washers to clean the product. Use a soft sponge.
3) The motor and alternator shouldn’t be submerged in water.
=> It is waterproof but only at the normal level for daily living.
4) Do not disassemble the motor or alternator.
If you disassemble the motor or alternator warranty will be void.
5) Do not operate the product in reverse direction at a speed higher than 5 km/h.
(avoid reverse rotations. It may damage the product due to abnormal voltages)
3. Regular Maintenance
For safe use of Mando Footloose, have a maintenance service every 6
months at the store. Perform the first maintenance service within 2 months of
date of purchase.
Wear a helmetthatmeets the safety code
Safety equipment
For the proper use of the product
Do not disassemble
Avoid reverse rotations
Carrying lighting devices and reflective material on your Mando Footloose vehicle
is important for your safety. Seeing and to be seen while participating in traffic con-
ditions is key. All member states of the EU have their own dedicated local national
regulations with regards to lighting and reflection, the way how these should be
carried and the conditions and timing when these should be carried. Please make
sure you are fully aware of the national regulations which apply to your personal
situation and please make sure your vehicle is equipped with the proper lighting
and reflective material in conformity with these national regulations.
