English
Guarantee of Quality
H -1
22
Mando Footloose user manual
23
A new way of moving
I
-1
Accessories
H -2
I
6. How to repair the product during the warranty period
In order to repair the product during the warranty period, visit the store with
your Mando Footloose and its warranty certificate and apply for the warranty
repair. The certificate is required for the warranty repair.
7. The area covered by the warranty
This warranty applies only to the products purchased and used within the
country where Mando Footloose is bought. Therefore, the warranty expires
when it is transferred to another country.
8. Other
The warranty is a written guarantee, promising to repair or replace the product
if necessary within a specified period of time. Therefore, in principle, repair
for the damage occurred after the warranty period is chargeable. However,
for damages resulted from the manufacturer the manufacturer will repair the
product at a fair cost based on the conditions stated in the warranty and the
degree of the manufacturer’s responsibility. In such case, contact the store.
* Based on a ride by pedaling. Subject to change according to the conditions of operating environment
including the intensity of pedaling, the weight of the rider and the road condition.
How to register a genuine product
1) Enter the information in Certificate of Authenticity on page 22
2) Please hand in Certificate of Authenticity to a shop.
3) Registration of a genuine product is now completed.
Application and limitation of the warranty
Location of the serial number
Registration of a genuine product
Specification
To apply for the warranty, a genuine product must be registered.
Driving System
Series Hybrid System
Wheel Size
20”
Maximum
Speed
25 km/h
Display
Detachable HMI Display
(2.4” Color LCD)
Range
Max. 35~45 km*
Frame
Aluminum
Motor
Dual winding motor, 250W
Fork
Carbon fiber
Battery
36V 8.2Ah
Weight
21.7 kg
Light
2) Install batteries.
Components ( Light unit, Bracket, Battery X 2 )
1) Slide the cover backward, while pressing
down the dot section on the top of
the unit.
4) Wind the bracket strap around the
handlebar.
5) Put the strap through the opening.
3) Replace the cover.
8) Press for 2~3 seconds to turn on
and off.
6) Screw the dial into the bracket to secure it
temporarily.
7) Insert the light unit to the bracket until it
cliks, and adjust the beam angle.
Securely tighten the dial, and cut off any
excess bracket strap.
