7
GEODESIC MONKEY CLIMBER™
#MM00191
ASSEMBLY STEPS
From bottom to the top of the Geodesic, there are six steps to follow …
STEP 1 - FRAME LAYOUT
Place
the 10 pieces of part #A
(long blue pole in transparent bag) on flat surface as shown
below. You’ll see 10 joints after finishing this step.
STEP 2 - FINISH THE FIRST LAYER
(a) Start from any one of the 10 joints. Connect
one part #B (short green pole in transparent
bag) and one part #A
with a part #F (short bolt), a part #G, and two parts #H. Use the tools
(parts I and J) to tighten them together.
ATTENTION:
Insert the bolt from the outside of the dome climber. That is, the nut should be
inside on the first layer of the Geodesic Monkey Climber™.
