background image

4 1/2"

5"

17 1/4"

18 1/2"

SIDE 1

SIDE 2

FRONT 2

CENTER

FRONT 1

SPECIFICATIONS

Model:

MP4512

Driver Complement:

3 x 3.25” mid-woofer
3 x 1” neodymium ferrofluid tweeter
2 x 3” mid-woofer (surrounds)

Finish Options:

Black

Impedance:

8 ohms/mains
12 ohms/surrounds

Frequency Response:

100Hz - 23kHz ±2dB

Recommended Power:

25 - 200 watts per channel

Dimensions (HxWxD):

4-1/2” x 18-1/2” x 5”
11.4cm x 47cm x 12.7cm

Weight:

9 lbs./ 4.1 kg.

NOTE: Side grilles are not user removable.

USING A MOUNTING BRACKET TO INSTALL THE MP4512

There are multiple threaded mounting inserts located at the center of the back baffle of the MP4512.  These can be used with a

variety of wall and ceiling brackets available from your dealer or the bracket manufacturer.

Warning:

Because the crossover is located behind the mounting holes, it is very important that you do not let the screws extend more than

1/4” into the cabinet.  If the screws extend deeper than a 1/4”, the crossover may be damaged.

When mounting the bracket, carefully tighten the screws.  If you start to feel resistance to the screw, stop turning it.  If, at that

point, the bracket isn’t secure, either use shorter screws or add washers between the screw head and the bracket.

Installation:

There are three inserts on the back of the MP4512.  The speaker is shipped with a set screw in each insert.  To use an insert,

remove the existing screw first.  When you use a new screw to secure the bracket, please keep in mind the warning above. Do not
remove the set screw from an insert unless you are mounting a bracket using that insert.  There must be a screw in each insert for
the speaker to perform properly.

1.  The top insert is 3/8”–16, and is compatible with the Omnimount 20.0 series of brackets.

2.

The middle and bottom inserts are 1/4”–20, and each is compatible with the Monster Cable MM1UMK bracket, as well as

with other brackets using 1/4”-20 hardware.

M&K 10 YEAR WARRANTY

All M&K Satellite speakers carry a ten year limited parts and labor warranty.  This warranty is transferable to new owners up to

ten years from the date of original purchase.  It does not cover abuse, misuse, repairs by unauthorized service stations, speakers with-
out M&K serial numbers, and those damaged in shipping or by accident. If you have any questions about the warranty, please con-
tact M&K.

DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR 

SERVICE WITHOUT OBTAINING PRIOR AUTHORIZATION

If you have any further questions regarding your MP4512, please contact your M&K dealer or the M&K factory at (818) 701-7010.

You may also reach us through e-mail at [email protected].

MP-4512 Manual

PN# 

08/13/04        pt/qrk

Summary of Contents for MP4512

Page 1: ...g important information contained in this manual It will help to ensure that you receive max imum performance from your MP4512 and understand why M K is known as The Choice Of Professionals SPEAKER LOCATION The MP4512 is magnetically shielded so it can be placed directly on top of a direct view television or directly above or below a flat screen display device It can be used in proximity to any te...

Page 2: ...logo is not attached to the speaker grille so that it can be placed properly once the speaker orientation is determined Once the speaker is installed you can attach the logo to the front grille using the adhesive on the back of the logo Place the logo at the bottom center of the grille making sure that it does not block any of the drivers The front grille is removable but the side grilles are not ...

Page 3: ...the Left Surround and Right Surround channels Instead the level for these channels should be set so they are 4 to 6 dB higher than the level of the front channels For example if the left center and right front channels are set to 0 dB set the Left Surround channel to 6 dB and the Right Surround channel to 6 dB Special Note On Side Channel Speaker Phase M K s Tripole Surround MatrixTM Technology Fo...

Page 4: ...llation There are three inserts on the back of the MP4512 The speaker is shipped with a set screw in each insert To use an insert remove the existing screw first When you use a new screw to secure the bracket please keep in mind the warning above Do not remove the set screw from an insert unless you are mounting a bracket using that insert There must be a screw in each insert for the speaker to pe...

Reviews: