WIRING WHEN THE SPEAKER IS ORIENTED TO POINT DOWN (FIGURE 1)
When the speaker is mounted above the television display device, connect your receiver to the MP4512 as follows:
Amplifier Channel
MP4512 Speaker Channel
Left Front
Front 1
Center
Center (do not use the unlabeled terminals)
Right Front
Front 2
Left Surround
Side 1
Right Surround
Side 2
WIRING WHEN THE SPEAKER IS ORIENTED TO POINT UP (FIGURE 2)
When the speaker is mounted below the television display device, connect your receiver to the MP4512 as follows:
Amplifier Channel
MP4512 Speaker Channel
Left Front
Front 2
Center
Center (do not use the unlabeled terminals)
Right Front
Front 1
Left Surround
Side 2
Right Surround
Side 1
Other Installation Notes
The M&K logo is not attached to the speaker grille so that it can be placed properly once the speaker orientation is determined.
Once the speaker is installed, you can attach the logo to the front grille using the adhesive on the back of the logo. Place the logo at
the bottom center of the grille, making sure that it does not block any of the drivers.
The front grille is removable, but the side grilles are not. Note that the front grille is not symmetrical and must be aligned properly
to be installed.
USE WITH AN M&K SUBWOOFER
The MP4512 is designed to be used in conjunction with an M&K subwoofer. Using an M&K subwoofer will give you true full-band-
width performance with powerful low frequencies. All M&K subwoofer models are compatible with the MP4512. Please follow the
instructions provided with your subwoofer and receiver to properly connect the subwoofer.
SIDE 1
SIDE 2
FRONT 2
CENTER
FRONT 1
FIGURE 1
MP4512 pointing down
