background image

Congratulations!  You now own a true breakthrough product.  The M&K MP4512 is a unique loudspeaker concept that provides high-

resolution reproduction of five channels of surround audio from a single cabinet utilizing M&K’s Tripole

®

Surround Matrix

TM

technology.

Unlike speakers that use electronic processing to create the illusion of surround only in a narrow “sweet spot,” the MP4512 dispers-

es sound into the room using five separate speaker elements to produce a convincing surround field that can be enjoyed by multiple lis-
teners over a broad listening area.

The MP4512 incorporates individual speakers for the left, center, right, left surround, and right surround channels. The left, center,

and right channel speakers have the identical elements as the acclaimed M&K Xenon LCR-25, each using a very high-performance 1”
fabric-dome Neodymium tweeter (with Ferrofluid) and a high-output 3.25” polymer-resin-coated-paper cone woofer.

The surround channels are reproduced by two high-quality 3” “wide-range” drivers, with one each mounted on the left and right sides

of the cabinet, respectively.  Each channel utilizes M&K’s exclusive Phase-Focused

TM

crossover, which is an element critical to the speak-

er’s ability to produce smooth response and even coverage of sound throughout the listening area.

Please take the time to read the following important information contained in this manual. It will help to ensure that you receive max-

imum performance from your MP4512 and understand why M&K is known as “The Choice Of Professionals.”

SPEAKER LOCATION

The MP4512 is magnetically shielded, so it can be placed directly on top of a direct-view television or directly above or below a flat-

screen display device. It can be used in proximity to any television without distorting the picture.

The front baffle of the MP4512 is angled, to allow you to mount the speaker so that it either points up or points down, allowing you

to aim the speaker drivers towards the listener’s ears.  In general, the speaker should be mounted so that it points up when it is mount-
ed underneath the television display, and it should be mounted so that it points down when it is mounted above.

In order to determine the proper connection for the left and right channels (both front and side/surround), you first must select the

orientation of the speaker.  Because the speaker can be oriented two ways, the speaker input terminals are labeled “1” and “2” instead
of “left” and “right.”

M

Miilllleerr  &

&  K

Krreeiisseell  S

So

ou

un

nd

d  C

Co

orrp

po

orraattiio

on

n,,  U

US

SA

A • 9351 Deering Avenue, Chatsworth, CA 91311-5858 • 818-701-7010 fax 818-701-0369 • www.mksound.com

M

Miilllleerr  &

&  K

Krreeiisseell  S

So

ou

un

nd

d,,  E

EU

UR

RO

OPPE

E •  Solrøed Center 12B, Level I  •  2680 Solrøed Strand  •  Denmark  •  Tel:   +45 56129047  •   Fax:   +45 56129045

M

&

K SOUND

MP4512

5-CHANNEL SINGLE-SOURCE MONITOR

INSTALLATION MANUAL

TM

Summary of Contents for MP4512

Page 1: ...g important information contained in this manual It will help to ensure that you receive max imum performance from your MP4512 and understand why M K is known as The Choice Of Professionals SPEAKER LOCATION The MP4512 is magnetically shielded so it can be placed directly on top of a direct view television or directly above or below a flat screen display device It can be used in proximity to any te...

Page 2: ...logo is not attached to the speaker grille so that it can be placed properly once the speaker orientation is determined Once the speaker is installed you can attach the logo to the front grille using the adhesive on the back of the logo Place the logo at the bottom center of the grille making sure that it does not block any of the drivers The front grille is removable but the side grilles are not ...

Page 3: ...the Left Surround and Right Surround channels Instead the level for these channels should be set so they are 4 to 6 dB higher than the level of the front channels For example if the left center and right front channels are set to 0 dB set the Left Surround channel to 6 dB and the Right Surround channel to 6 dB Special Note On Side Channel Speaker Phase M K s Tripole Surround MatrixTM Technology Fo...

Page 4: ...llation There are three inserts on the back of the MP4512 The speaker is shipped with a set screw in each insert To use an insert remove the existing screw first When you use a new screw to secure the bracket please keep in mind the warning above Do not remove the set screw from an insert unless you are mounting a bracket using that insert There must be a screw in each insert for the speaker to pe...

Reviews: