M&K Sound IW150, Operation Manuals

Page: 3 / 12

3
B A C K B O X I N - W A L L L O U D S P E A K E R S
Introduction
M&K Sound backbox in-wall speaker systems are designed for easy installation.
You are just a few easy steps away from enjoying the acclaimed M&K sound.
Accessories
• Cut-out template integrated in packing for marking of wall position and cut-out dimensions
• Damping pads, cable fittings, and push terminal connectors for quick install
• Dog screw mounting system with self-locking clamps for solid attachment to wall
• Metal front grille and front baffle with integrated magnets for easy grille mounting
Placement
For placement of M&K Sound in wall speakers, please note the following basic
recommendations for installation.
Defining correct
placement height
for M&K speakers in
stereo or surround
set-up is essential,
beginning with
finding the speak-
er’s acoustic on axis
point, marked
between woofers
and tweeters as
shown below.
• For both stereo and surround front speakers the system’s acoustic “on axis-point” should be approximately 10-
15 cm above ear level – when sitting in listening position.
• For surround rear and side speakers the systems acoustic “on axis-point” should be approximately 70-90 cm
above ear level – when sitting in listening position.
• Every new M&K Sound In-Wall speaker is designed to be as universal as possible, whether used in In-Wall and/
or In-Ceiling applications. The range is fully compatible with all current and future sound formats, including
Dolby Atmos, DTS X and Auro. For specific directions of any speaker placement, we recommend to study the indi-
vidual formats own instruction manuals.
Metal front grille Metal baffle with magnets attached
Dog screw system
Pust terminal connectors
Backboxed cabinet with damping
pads and cable fittings
IW300 Axis IW150II Axis IW950 Axis