![background image](http://html1.mh-extra.com/html/mandik/oi-series/oi-series_installation-instructions-manual_4017268019.webp)
19
On the rear side, in the right top corner, there are 3 wiring contacts marked L-Live, H-Heat, C-Cool.
L is wired to control voltage (e.g. phase), H serves for heating control, C is wired to A/C (cooling)
For heating control slide the selector to its right position (flame symbol), for A/C control to its left position
(snowflake symbol). The middle position means OFF.
Use the two-position switch to set the delay in turning on the heating appliance (delay=quick tempera-
ture fluctuations do not cause to switch ON/OFF repeatedly)
(rear side, under wiring contacts)
HEAT
COOL
NO DELAY
10 sec
5 min
DELAY
5 min
5 min
Delay prevents frequent thermostat switching during temperature fluctuations.
1. After wiring insert two new alkaline batteries AA 1.5V (Mind the polarity!). Data shall be displayed.
2. Press the reset button – RST (with rounded-end instrument) to reset the display.
3. Turn ON the heating appliance. It will remain OFF until TP08 is set so that its output is closed – a
rotating propeller symbol appears on the display.
1. Starts with checking the temperature and display will show room temperature.
2. If the batteries are weak, C, P and colon shall flash.
3. If the temperature is under 0°C and HEAT is ON, the display will show L.
4. If the temperature is over 39,5°C and COOL is ON, the display will show H.
1. Press , day shall flash (1-7), by pressing up and down arrows the desired day is set.
2. Press , hours shall flash, by pressing up and down arrows the desired hour is set.
3. Press , minutes shall flash, by pressing up and down arrows the desired minute is set.
4. Either pressing or after 10 seconds of inactivity closes the clock settings and returns the
thermostat into normal operation.
5. Time format 12 or 24 hours can be selected by the jumper on the PCB. The default setting is 24
hours.
Summary of Contents for OI Series
