M&C LA Series, Instruction Manual

Page: 15 / 29

www.mc-techgroup.com LA | 1.01.01 15
Union nut
Antikink
Pos. Part No. Description
1
0B
90E1000 FPM O-ring 14
2 90E1010 PVDF
– pressing ring 16
3 03E1001 Liquid sensor LA1S with 4 m connection cable
4 03E3100 Flow chamber LS with union nut
Figure 4
Mounting of the sensor LA1S into flow chamber LS
12.4 MOUNTING THE SENSOR LA25S ONTO THE UNIVERSAL FILTER
If individual components are assembled by the customer, the sensor is mounted as follows:
•
Screw the attached mounting fitting with a Teflon tape into the filter body.
•
Put the sensor with pre-assembled union nut and the pre-assembled pressing and cutting ring
into the fitting and tighten the union nut hand-tight. Then tighten the union nut with a flat key
exactly 1 ¼ rotations. The nut is then correctly fitted.