18
Temperature controller 70304G | 1.00.02
www.mc-techgroup.com
17
70304G WITH mA-OUTPUT
The controller
70304G
is also available with a mA-output. This output is also configurable. The output
signal and the temperature range are adjustable.
17.1 ADJUSTING SIGNAL TYPE AND TEMPERATURE RANGE
To adjust the signal type and temperature range:
PGM-key,
USEr
,
up to
Conf
, PGM-key,
up to
OutP
, PGM-key,
up to
OutA
, PGM-key,
Out6
,
PGM-key,
Fnct
,
SiGn
, PGM-key,
SiGn
blinking, with
or
choose signal type:
0 = 0-10V
1 = 2-10V
2 = 0-20mA
3 = 4-20mA (factory setting)
Takeover of the adjusted value takes place after 2sec.
up to
0Pnt
(zero point of the temperature range): PGM-key,
0Pnt
blinking, with
or
adjust zero
point (0,0 = factory setting).
up to
End
(end point of the temperature range): PGM-key, End blinking, with
or
adjust end
point (200,0 = factory setting).
18
DECOMMISSIONING
NOTE!
The place of installation of the temperature controller must be protected
from frost also in the time in which the unit is deactivated.
No particular measures are necessary for brief decommissioning of the temperature controller.
