20
SP2500-H | 1.00.02
www.mc-techgroup.com
12.5.1 VERSIONS WITH INTERNAL CAPILLARY TUBE THERMOSTAT
•
Remove the connection box cover. The electrical wiring
diagram shown is contained in the cover.
•
Insert the mains cable (min. 3 x 1.5 mm
2
) through the
cable gland and connect to the appropriate terminals.
•
Insert the signal cable (low temperature alarm) through
the cable entry and connect to the appropriate terminals
(contact position T
u
indicates alarm).
•
Screw the cover back in place again.
Note
The use of temperature-resistant cable is recommended!
12.5.2 VERSION WITH EXTERNAL THERMOSTAT
•
Remove the cover of the connection box. The
electrical wiring diagram shown is contained in
the cover.
•
Insert the mains cable (min. 3 x 1.5 mm
2
)
through the cable gland and connect to the
appropriate terminals.
•
Insert the temperature sensor cable through the
cable entry and connect to the appropriate
terminals.
•
Screw the cover back in place again.
Note
Use appropriate compensating cables for thermocouples!
