7
B
A
B
A
B
A
G
B
SeAT DePTH
The seat depth on Manatee (size 0) can be ad-
justed in two positions:
1) Dismount the screws (A) in both sides with a
4 mm Allan key.
2) Replace the short tubes with the long enclo-
sed ones. Fasten the screws (A) securely.
Please follow the below to adjust the seat depth
of the Manatee (size 1+2):
1) Loosen the screws (A) in both sides with a 4
mm Allen key.
2) Adjust the depth into the required position by
pulling out the frame.
3) Fasten the screws (A) again.
Please check, on a regular basis, that the
screws are fastened safely. Make sure that
the screws mesh into the nuts.
The user must be removed from the prod-
uct before adjustment.
Secure the chair when any adjustments
have been made. Then place the user into
the Manatee.
GB
SeAT HeIGHT
The seat height of the Manatee can be adjusted
by changing the position of the legs.
1) Press the release buttons (A) in both sides.
2) Angle the legs (B) into the wanted position.
3) Please check that all release buttons (A)
mesh into place after adjustment
The legs also adjusts when pulling out the strap
underneath the seat.
The user must be removed from the pro-
duct, before angling the chair legs.
Secure the chair when any adjustments
have been made. Then place the user into
the Manatee.
GB
