manualshive.com logo in svg

Manatee r82, Manual

Share
Download
Manatee r82 Manual Download Page 12

12

B

A

C

D

e

G

B

FoLDInG THe 

CHAIR 

The Manatee can easily be folded and stored 

without taking up much space.

Follow the description below to fold the Manatee 

correctly:

1) Press the release buttons (A) on both sides 

and move the leg support up into the horizon-

tal position.

2) Press the release buttons (B) and move down 

the back into the horizontal position.

3) Press the release buttons (C) and tip up both 

the front and rear legs into horizontal.

The Manatee is now folded.

The user must be removed from the pro-

duct, before angling the chair legs.

We recommend to remove the pressure 

load from the users body and legs, before 

angling the back and leg support. Put a 

gentle back pressure on the back and leg 

support to remove the pressure load.

Please check that all release buttons mesh 

into place after adjustment.

Please take care not to get your fingers 

caught between the rotary joint and the 

back (D). If desired, it is possible to pull out 

the release strap with one hand and angle 

the back with the other hand (e).

GB

Summary of Contents for r82





















Reviews:

No comments

Brands by name

Popular brands

Load more brands