Man V12-1800, Installation Instructions Manual

Page: 11 / 92

Safety regulations
9
Risk of damage from penetration of dirt!
D
When the clean side of the fuel system has been opened it is not permissible to use
compressed air for cleaning
D
During assembly work loose dirt must be removed with the aid of suitable extractors
(industrial type vacuum cleaners)
D
Use only fluff
‐
free cleaning cloths on the fuel system
D
Clean tools and working materials before starting to work
D
Only tools without any damage may be used (cracked chrome coatings)
D
When removing and installing components do not use materials such as cloths,
cardboard or wood since these could shed particles and fine fibres
D
If any paint chips/flakes off when connections are loosened (from possible over
‐
coating)
these chippings must be carefully removed before finally loosening the screw
connection
D
The connection openings of all parts removed from the clean side of the fuel system
must be
immediately closed up with suitable caps/stoppers
D
These caps/stoppers must be packed protected from dust prior to use and after being
used once they must be disposed of
D
Following this all the components must be carefully stored in a clean, closed container
D
Never use used cleaning or testing liquids for these components
D
New parts must not be removed from their original packing material until directly before
use
D
Work on removed components may be carried out only at a workplace specially
equipped for it
D
If removed parts are shipped always use the original packing material of the new part