Foreword
6
Carefully read the Operating Instructions before starting any work!
This is especially valid for the chapter on General Safety Instructions
and the safety instructions in each of the chapters.
1
Preface
1.1
Validity of the Assembly Instructions
These Assembly Instructions provide important information for setting up stationary MAN Industrial Gas
Engines of the model series E0834 LE / E0836 LE after being delivered from the manufacturing plant in
Nuremberg.
NOTE!
Planning of the installation of the engines must have already been made in the project
phase, the basis for which are the Installation Instructions for MAN Industrial Gas Engines
for Cogeneration Power Stations (51.99496-8142). These Assembly Instructions are only
valid after the installation planning has been completed and the engine is ready to be
installed into the plant (cogeneration power station, power generator).
All open questions about the installation of the engine are to be clarified during planning (project phase).
The scope of delivery will also be determined in this project phase. After the engine is delivered according
to the job specifications, installation in the plant can be started.
Compliance with all safety precautions and handling instructions are prerequisites for safe working
conditions. Furthermore, the valid local accident prevention regulations for the engine's area of application
and the general safety regulations must be followed.
1.1.1
Important Additional Information to the Assembly Instructions
-
Installation drawing
-
Component drawing of the sensors
-
Shipping documents for engine
1.1.2
Supplementary Information to the Assembly Instructions
-
Operating instructions (included in delivery)
-
Fluids and Lubricants for MAN Industrial Gas Engines (included in delivery)
For the service personnel
-
Repair instructions
-
Spare parts catalogue (included in delivery)
