1. Safety instructions
•
This workshop crane may only be operated by experienced persons who
are familiar with the contents of this user manual.
•
The lifting load must not exceed the maximum capacity of the workshop
crane at any position of the lifting arm.
•
Ensure that the workpiece to be lifted is securely tied down and does not
exert lateral pressure on the lifted or suspended load.
•
Use only slings and chains with a capacity larger than the load.
•
The workshop crane should be operated with good lighting and without
unnecessary obstacles. Make sure that the load does not slip or wobble
during transport.
•
Keep the load center of gravity in the crane base at all times.
•
Do not stand under the workshop crane when it is in the raised position
with a load.
•
Place and lock the forks of the workshop crane in position, ensuring that
the pin engages fully in the hole in the boom.
•
Do not work with the workshop crane if the forks are not in the correct
position and the boom is not secured.
•
Before transport, lower the load to the lowest position. After moving the
load, place it on the ground or on the workbench.
•
Only use the workshop crane on a level surface.
•
The workshop crane must not be stored on sloping ground.
•
No changes may be made to this workshop crane.
•
Children and unauthorized personnel must be kept away from the work
area.
•
Failure to follow these warnings may result in personal injury and/or
property damage.
•
ENG
8