10
EN
• Switch off the power tool immediately when the tool is in insert jams. Be prepared
for high reaction torque that can cause kickback. The tool insert jams when:
- the power tool is subject to overload or
- it becomes wedged in the workpiece
• Hold the power tool with a firm grip. High reaction torque can briefly occur while
driving in and loosening screws.
• Secure the workplace. A workpiece clamped with clamping devices or in a vice is
held more secure than by hand.
• Keep your workpiece clean. Blends of materials are particularly dangerous. Dust
from light alloys can burn or explode.
• Always wait until the power tool has come to a complete stop before placing it
down. The tool insert can jam and lead to loss of control over the power tool.
• Avoid unintentional switching on. Ensure the On/Off switch is in the off position
before inserting battery pack. Carrying the power tool with your finger on the
On/Off switch or inserting the battery pack into power tools that have the switch in
accidents.
• Do not open the battery. Danger of short-circuiting.
• Protect the battery against heat, e.g., also against continuous sun irradiation and
fire. There is danger of explosion.
• In case of damage and improper use of the battery, vapors may be emitted. Provide
for fresh air and seek medical help in case of complaints. The vapors can irritate the
respiratory system.
• When the battery is defective, liquid can escape and come into contact with
adjacent components. Check any parts concerned. Clean such parts or replace
them, if required.
PRODUCT FEATURES
1. Tool holder
2. Rotational direction switch
3. On/Off switch
4. Handle
5. Battery pack
6. Battery charger
7. Pushlock button
Summary of Contents for M.DC.T.IW.20.500
Page 17: ......
