Attaching the Knob
Detaching the Knob
1. Rotate the Film Advance Knob
Receptor clockwise as far as it will
go. The red dot (B) will then be facing
upward.
2. With the Release Lever (D) at its
lowest position, place the knob against
the Knob Receptor, and then rotate the
knob about 20 degree clockwise. The
knob will lock into place.
1. Rotate the Film Advance Knob
until it stops.
2. While holding the Release Lever
(D) in the up position with a small
screwdriver, or similar tool, rotate
the knob counterclockwise and it
will disengage from the camera
body.
When changing the Film Advance Knob or
Crank, first rotate it until it stops and the
shutter is cocked.
If this is not done, the Camera Body Re-
ceptor, and red dot (B), will freely rotate,
making it difficult to make the replacement.
52
