Mamas & Papas pliko switch easy drive, Instructions For Use Manual

Page: 12 / 16

- 12 -
– arrow_a) into the leg divider until they click into place
(arrow_b). To unfasten it, press the round button in the
centre of the buckle (arrow_c) and pull the waist straps out
(arrow_d).
14 To tighten the waist strap, pull on both sides in the direction
of the arrow (arrow_a). To loosen it do the opposite. The
waist strap can be tightened as far as the safety lock
(fig_b).
15 To adjust the height of the safety harnesses, release the two
buckles on the rear of the backrest.
Pull the shoulder straps towards you (arrow_a) until the
buckles are released and insert them in the backrest loops
(arrow_b). Remove the shoulder straps from the sack
(arrow_c) and insert them in the most appropriate loop
(arrow_d), then re-attach the two buckles on the rear of the
backrest (arrow_e) The buckles are securely attached when a
click is heard (fig_f).
16 HOOD: to attach the hood insert the connections into the
sides of the seat (fig_a) and then fasten the buttons on the
rear of the backrest (fig_b). To remove the hood: disengage
the connections and unbutton from the backrest. To raise the
hood: pull it towards you; to close the hood: push it back. To
convert the hood into a sun canopy, open the double zipper
(fig_c) and unfasten the buttons on the rear of the backrest.
The child’s favorite toy can be hung from the loop on the hood
(fig_d).
17 COVER: Fit the cover on and fasten the buttons under the
leg rest (fig_a) and on the sides of it. For the baby carriage
version, raise the leg rest, put the cover over the front bar
(fig_b) and fasten it with the buttons on the hood (fig_c).
18 For the stroller version, lower the footrest, insert the cover
underneath the front bar then fold the top over.
19 RAIN CANOPY:Before the rain cover can be fitted you will
need to attach the hood as shown on page 12.
Zip the rain cover onto the hood (A).
Pull the front of the cover down over the leg rest of the seat.
Fasten the press studs on the sides of the rain cover to the
studs on the sides of the hood (B).
When entering a building or between rain showers the front
of the rain cover can be lowered by unzipping it from the
hood (C).
Regularly check that the child is not becoming over heated
in warm weather when using the rain cover. .
20 REAR LEDGE: the rear ledge makes it easier to negotiate
kerbs or level differences with the stroller (fig_a).
21 FOLDING UP: The stroller can be folded up without the seat,
with the seat facing the person pushing (recline the backrest
before folding it) or with the seat facing forward (raise the
backrest before folding it and recline it once it is folded).
To fold up the stroller, slide the two elements along the
handlebar as shown in the figure (fig_a), set the front wheels
to fixed mode and fold up the hood if it is on.
Raise the two levers on the handlebar one at a time until they
click (fig_b) and push down on the handlebar (fig_c) to unclip
the side tubes at the front (fig_d);
22 Pull up the central handle (fig_e). Check the correct closure of
the chassis from the safety hook (fig_f). With the seat facing
the person pushing, the folded chassis can be made even
more compact by lowering the handlebar (fig_g). The stroller is
freestanding when folded up.
23 TRANSPORT: the stroller can be carried by the central
handle, keeping the front wheels fixed (fig_a) or by the side
handle (fig_b).
24 REMOVABLE COVERS: Pull the fabric covering off the ledge
(fig_a), release the attachments of the fabric covering from the
armrests (fig_b), unfasten the buttons on the sides of the backrest
(fig_c) and remove the leg divider strap from above by pushing it
from under the seat (fig_d).
SUREFIX ATTACHMENT SYSTEM
25 Surefix is a fast and practical system that allows you to
attach the Primo Viaggio car seat or the Pliko Switch seat to
the Surefix Base of the chassis in one quick step.
Place the item on the Surefix Base and press down with
both hands until it clicks into place.
Always apply the chassis or stroller brake before attaching
and removing products (refer to the respective instruction
manuals).
Check that the child transport unit is properly attached.
SERIAL NUMBERS
26 Pliko Switch reports information as at the date of
manufacture of the product.
_ Product name, date of manufacture and serial number of the
seat (fig_a) and of the carriage (fig_b).
This information is required for any complaints.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather: water, rain,
or snow; prolonged and continuous exposure to bright sunlight
may give rise to colour changes of various different materials;
store this product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic parts with
a damp cloth. Do not use solvent or similar cleaning products;
keep all metal parts dry to prevent rusting; keep moving parts
clean (adjustment mechanisms, locking mechanisms, wheels, ...)
and free of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and
soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to remove
dust and wash by hand at a maximum temperature of 30°C;
do not wring; do not use chlorine bleach, do not iron; do not
dry clean; do not apply solvent-based stain removers and do
not dry in a tumble dryer.
MAMAS & PAPAS AFTER-SALES SERVICE
If any parts of your Mamas & Papas product should be
accidentally mislaid or damaged, use exclusively genuine
original Peg Pérego replacements. For any repairs,
replacements, product information, and orders for genuine
original replacement parts and accessories, please contact
Mamas & Papas After Sales Service indicating the product
serial number, if any.