- 20 -
fitting the Primo viaggio Car seat
Apply the brakes on the
pushchair before operating the
attachment brackets.
Lower the backrest to its
lowest position by pulling
the lever at the top of the
backrest upwards, then lower
the backrest as far down as it
will go. Now raise the backrest
upwards one position.
In the corners of the seat unit
where the backrest joins the
seat base there are two flaps.
Under the flap are the
attachment brackets.
Pull the locks on the sides of
the frame outwards and hold.
Rotate the attachment brackets
upwards as far as they will go.
The attachment bracket will
lock in a vertical position.
Align the locking clip of the
car seat with the attachment
brackets of the pushchair.
Push the car seat down onto
the attachment brackets until it
clicks into place.
Check the car seat is firmly in
place by attempting to lift it
upwards.
Summary of Contents for pliko pramette
Page 1: ...Instructions for use pliko pramette...
Page 27: ......
