SLACKENING THE HARNESS
FITTING THE CAR SEAT WITH THE 3-POINT LAP &
DIAGONAL SEAT BELT 9-18KG
(approx. 9 months to 4 years).
The harness is slackened by
pressing the lever (under the seat
cover) on the front of the seat.
Press down on the label marked
press (1) as you grip the two
shoulder straps with your other
hand. Pull the shoulder straps
towards you to loosen the harness
(2).
Take care when adjusting the
shoulder straps that you do not
trap the harness adjuster strap as
you press the lever down.
1
2
2
1
Place the car seat on the
vehicle’s seat. Ensure that
the backrest of the car seat
is pushed
fi
rmly against the
backrest of the vehicle’s seat
(1).
Thread the car seat belt
through the seat belt routing
slot in the seat’s plastic
backrest furthest from the
car’s seat belt buckle and
then out through the other
seat belt routing
slot
and
fasten it into the seat belt
buckle (2).
