fastening the safety seat buckle
TIGhTeNING The hARNeSS
Slot the two metal sections of the buckle connectors
together (1).
Slot the two buckle connectors into the slot in the top of the
buckle until they “click” into place (2).
Always check the harness is correctly locked by pulling the
shoulder straps upwards (3).
To release the harness, press the red button on the buckle
downwards.
Pull the shoulder straps upwards
to remove the slack from the lap
sections of the harness (1). Now
pull the adjuster strap until the
harness is fully tightened (2).
The harness should be adjusted as
tightly as possible without causing
discomfort to your child.
Ensure that the lap strap portion
of the harness is located as low
as possible towards the thighs-not
around the tummy.
A loose harness can be dangerous.
Check the harness adjustment
and tighten each time the child is
placed in the seat
1
1
1
2
2
3
