background image

– 2 –

IMPORTANT: READ THE INSTRUCTIONS CAREFULLY BEFORE USE
AND KEEP THEM FOR FUTURE REFERENCE. YOUR CHILD MAY BE

HURT IF YOU DO NOT FOLLOW THESE INSTRUCTIONS

The correct use and maintenance of your Perfect Height Swing will ensure it gives long and
trouble-free use. When somebody else is using your Perfect Height Swing, ensure they also know
how to use it. The safety of your child is your responsibility.

BEFORE ASSEMBLY

• Read the instructions thoroughly before attempting construction.
• Follow each stage of construction and operation step-by-step.

• Unpack all the components and identify them against the components list.

• Do not discard any packaging until you are certain you have all the correct components.

• If any items are damaged or missing please contact your retailer, or call our Customer Care

Helpline on: 01484 438222.

AFTER SALES SERVICE:

If when you receive your Mamas & Papas product you need

assistance, spare parts or you are unhappy with any aspect of the goods please

contact our Customer Care Helpline on: 01484 438222

, or e-mail us at

[email protected] 

where one of our trained advisors will be able to

help you, in order to avoid you having to return your product to the retailer. You can also visit
our website at 

www.mamasandpapas.com 

for the latest product information.

INSTRUCTIONS FOR SAFE USE

PERFECT HEIGHT SWING

• The Perfect Height Swing must be assembled by an adult.

• WARNING: A CHILD’S SAFETY IS YOUR RESPONSIBILITY.

• NEVER LEAVE YOUR CHILD UNATTENDED.

• IT IS DANGEROUS TO PLACE THIS PRODUCT ON AN ELEVATED SURFACE.

• Never rock the swing manually.

• Do not allow older children to rock or play with the swing.

• Always use the safety harness. Fit the harness securely to the child.

• Ensure that all hazards such as small objects, electrical flexes and sharp or hot items are

kept out of your child’s reach.

• Always ensure the swing is on a level stable surface before use.

• Make sure your child is clear of moving parts before making adjustments.

• Clean the swing with a damp cloth or sponge and a mild detergent. Do not use bleach or

solvent based cleaners as these may damage the fabric.

• Check the swing regularly for damage and ensure that the harness is secure and performs

correctly. No lubrication is necessary.

• Exposed edges of the covers are often the first to wear. Remember this as you transport,

handle and store your swing.

• Never adjust the height of the swing when your child is in the seat.

• Only use the swing in the reclined position until your child can sit up by themselves.

• Discontinue use of the swing when your child attempts to climb out or becomes too active

to safely use the swing or weighs 11kg.

• Do not raise or lower the seat, fold or move swing while occupied by your child.

• DO NOT lift by the play centre. Do not use toys if any plastic parts are loose, cracked or

broken.

• Lock swing legs in place before use.

• DO NOT allow other children to play around swing while in use.

• DO NOT use the swing without the seat cover.

 

Summary of Contents for GO1M-R1 perfect height swing

















Reviews: