-5-
Rear leg connector
-5-
ASSEMBLING THE FRAME
B
C
A1
A2
fig 1
Pivot
Front leg connector
A1: Slide the rear left
leg into the rear right
leg until the pin springs
through the location
hole (fig 1).
A2: Slide the front left
leg into the front right
leg until the pin springs
through the location hole
(fig 1).
B: Slide the top of the
legs into the pivots on
the seat frame. Ensure
the legs are fully inserted
into the pivots on the
seat frame.
C: Flip tray over into
correct position. Ensure
tray is engaged on frame
correctly.
