6
Slot the hooks on the ends of the tray into the
slots in the sides of the seat (1). Ensure the
feet on the ends of the tray are resting on the
buttons on seat under the tray (2). Push the
tray down until it locks onto the tray support
(3).
Slot the buckles on the ends of the harness
straps through the slots in the seat pad.
Place the seat pad in the seat and slot the
buckles through the slots in the seat.
bop highchair
Attach the tray support to the front of the
seat. Slot the tabs on the back of the support
into slots in the seat (1). Rotate the support
down until the front locks onto the seat (2).
5
7
8
Slot the tabs on the waist straps into the
buckle (1).
To adjust the harness, slide the straps through
the adjusters to the required lengths (2).
3
2
Slot the two back legs into the rear housing
on the seat. Push the pins on the legs inwards
and fully insert into the housing. Ensure the
pins are protruding though the holes in the
housings after fitting.
Slot the feet onto the ends of the legs.
Ensure the feet are slotted onto the correct
legs. The base of the feet are marked with
two letters, see diagram for the correct
position.
bop highchair
Attach the two front legs to the seat.
Slot the ends of the legs into the housings
on the seat. Push the pins in the tops of the
legs in and slide into the housings (1), ensure
the ends of bar on the seat insert into the
housings on the legs (2). Ensure the pins are
protruding though the holes in the housings
after fitting (3).
1
3
4
AssEMBLY:
Slot the end of the foot rest into the housing
on the underside of the seat. Push the leg rest
in until it locks into the housing.
DIsAssEMBLY:
Push pin ‘a’ towards the footrest to release the
lock and pull the footrest out of the housing.
2
