FITTING THE HOOD
8
Slot the back of the hood
through the handlebars
and position the hood
pivots against the frame.
Fasten the press studs on
the side flaps of the hood
A
to the studs on the sides
of the backrest.
Fasten the two press studs
on the back of the hood
B
to the studs on the
pushchairs backrest.
Push the tabs on the end
of the hood pivots onto
the frame.
Push the tensioning bars
on the hood down.
To remove the back section
of the hood, unfasten the
zip in the middle of the
hood.
Removing the hood is the
reverse of fitting.
Important
: Always release
the tensioning bars and
fold the hood back before
folding the pushchair.
Hood pivot
A
A
B
Zip
