FITTING AND USING THE HAND PUMP
21
The hand pump is stored in
a removable pouch
attached by two velcro
straps to the rear of the
basket frame.
Remove the pump from
the pouch and screw in the
narrow end of the adaptor
(stored in the top of the
pump) into the hole in
bottom of the pump.
Remove the dust cap from
the wheel valve and attach
the large end of the
adaptor to it, then pump
up the tyre.
Important
: Never inflate
the tyres above 28 P.S.I.
Always replace the dust
cap to prevent damage to
the valve.
FITTING THE RAINCOVER
1
Slot the centre section of
the hood cover between
the handlebars. Then
fasten the four velcro
pads together.
2
Fasten the velcro straps
under the footrest.
Regularly check that the tyres are correctly inflated. When pushing your pushchair always check that
no sharp objects are in your path as these may puncture the pneumatic tyres.
Puncture repair:
In the event of a puncture you will need to purchase a set of tyre levers and a
puncture repair kit from a reputable bicycle shop. Always follow the instructions given in the
puncture repair kit.
CARE AND MAINTENANCE OF THE TYRES
2
1
Hand pump
and
adaptor
Hand pump
pouch
