32
properties will be lost.
• To warm the milk, place in a bath of hot water or a bottle warmer. To warm to body temperature,
running water can also be used. Start with cold running water and gradually increase the temperature
until the milk is warm.
• Remove the screw ring and sealing disc of the Easy Start before placing the bottle in the water bath or
bottle warmer for warming. Be sure to remove teat and cap before heating.
• Breast milk should never be refrozen. Pour warmed unused milk away.
• Never mix newly expressed breast milk with frozen milk.
• Always check the temperature of the milk before feeding.
• Once your baby has drunk from a bottle of breast milk, it should be used within the hour and anything
left over should be thrown away.
5.3. MAM Storage Solution
Instructions for use:
• Check all components before each use. Throw away at the first signs of damage or weakness.
• This product is suitable for food contact.
• Fill the Storage Solution only up to the 120ml level mark for freezing. Never overfill.
• Use a pencil for the washable labelling area. Do not use permanent markers.
Cleaning & Sterilising
• Before first use, separate all parts and place them in boiling water for 5 minutes. This is to ensure
hygiene.
• All components are top rack dishwasher safe (max. 149°F / 65°C).
• Components may become discolored as a result of food contact or cleaning in the dishwasher. This
does not affect their performance.
• Do not use abrasive cleaning agents. Use only soft bristle brushes or soft sponges. Rough/hard
scourers can scratch the plastic.
• Sterilise using one of the following methods: steam sterilising (electric or microwave, according to the
manufacturer’s instructions), boiling in water for at least 5 minutes or immersing in a liquid sterilising
solution.
• Can be stacked after cleaning when dry.
Warming baby food (do not overheat):
• To warm baby food, we recommend placing it in a bath of hot water or a bottle warmer.
• Remove the lid of the Storage Solution before placing the cup in a bath of hot water or a bottle warmer.
• To distribute heat evenly, stir the baby food thoroughly after heating and allow time to cool.
For your child’s safety and health:
WARNING!
• Always use this product with adult supervision.
• Keep all components not in use out of the reach of children.
6. Feeding
MAM recommends the MAM Easy Start™ Anti-Colic bottle for feeding breast milk.
6.1. Easy Start™ Anti-Colic bottle
Instructions for use:
• Clean before first and each subsequent use.
• Before first use separate all 6 parts and place them in boiling water for 5 minutes. This is to ensure
hygiene.
• Inspect all individual bottle parts before each use and pull the feeding teat in all directions. Throw away
at the first signs of damage or weakness.
• To ensure proper cleaning/sterilising all bottle parts MUST be disassembled.
