MAM Easy Start Anti-Colic, Quick Start Manual

Page: 3 / 6

7
Self-sterilising function of Easy Start:
The self-sterilising function of the Easy Start is proven to be effective for killing common household germs and bacteria. This method is
completely sufficient and safe. For the best results, please follow all instructions carefully and use only as directed.
This practical and time-saving function can be achieved in 3 simple steps. Always thoroughly clean individual bottle parts before
beginning this process!
Step 1:
Assemble clean bottle parts as follows: base with silicone valve, teat with screw ring,
bottle body and lid.
Step 2:
Fill the base with silicone valve with 20 ml of cool water. The protective cap makes a
practical measuring cup.
Step 3 : Place the screw ring with teat in the bottle base. Place the bottle body on it (optionally
screw in slightly to avoid pouring out hot water by removing the bottle from microwave). Place the
protective cap on top.
For your child’s safety and health
WARNING!
Always use this product with adult supervision.
Never use feeding teats as a soother.
Continuous and prolonged sucking of fluids will cause tooth decay.
Always check food temperature before feeding.
Keep all components not in use out of the reach of children.
Sterilising in the microwave:
Set the microwave timer according to the number of bottles being simultaneously cleaned. Set microwave from 500 to 1000 Watts.
Allow bottle to cool down before removing from microwave. Recommended cooling time: 10 minutes at opened microwave door.
Pour away the leftover water from the base. Allow bottle parts to dry.
Always store bottle assembled.
Heating instructions:
NEVER pour boiling water into the bottle.
Place in a bottle warmer, under hot running water or in a container of heated water
NEVER heat or cool a sealed bottle. Remove the protective cap and teat (with screw ring) before heating, especially before bottle warmer
and microwave heating. Do not overheat as this may damage the bottle.
Take care when heating in the microwave.
Stir thoroughly after heating to evenly distribute heat. Allow the standing time recommended by the microwave manufacturer. Test the
temperature before serving.
Wrap cloth or towel around bottom of bottle and shake to absorb any excess water after warming in a bottle warmer or boiling water.
After warming the bottle in a bottle warmer or boiling water it is recommended to tighten the bottom of the bottle.
Do not place bottle in heated oven.
Do not leave single bottle parts in direct sunlight or heat.
Always use only MAM teats with the MAM bottles.
Use only sugar free food or liquids.
To avoid injury, do not let baby walk with bottle.
Do not put your baby to bed with bottle. Prolonged contact with liquids may cause severe tooth decay.
Bottle teat fits all MAM wide neck bottles and the Trainer.
3 2
1
Number of bottles
sterilised at the same
time
Estimated duration
of sterilising [min]
1
3
2
4
3
5
4
6
5
7
6
8
After the process is complete, the Easy Start bottle remains disinfected up
to
48 hours
after self-sterilising in the microwave, provided that it stays
assembled as shown on Step 3.
8
Additional Instructions:
Follow the instructions in the user manual of your microwave or multifunctional device.
Ensure that all parts from the self-sterilising bottle and microwave (including waveguide cover and turntable) are COMPLETELY clean and
free from dirt, food residue, fat or oil splashes. If not this could lead to the product melting, the microwave sparking or the waveguide-cover
burning!
The self-sterilising bottle should only be placed on solid and flat surfaces.
Do not put the self-sterilising bottle in the center of the turntable as this could result in an uneven heat distribution.
Do not leave your microwave unattended during the sterilising process.
Never place the device in the microwave without water
Stop the microwaving process immediately if all the water has been vaporised!
Filling the base with too much or not enough water can damage the bottle.
Always set the microwave to the correct power and time.
If using a combination microwave oven, ensure that the self-sterilising bottle is not exposed to the heat of the grill because this will
damage it.
TAKE CARE when handling recently disinfected items: they may still be hot.
Wash hands before touching disinfected items.
Always store the bottle dry.
Hold the self-sterilising bottle upright when removing from microwave to avoid spilling out hot residual water.
Do not wash self-sterilising bottle after disinfection. Do not touch the teat after disinfection. Handle teat by using the screw ring.
Heating instructions:
NEVER pour boiling water into the bottle.
Place in a bottle warmer, under hot running water or in a container of heated water.
NEVER heat or cool a sealed bottle. Remove the protective cap and teat (with screw ring) before heating, especially before bottle warmer
and microwave heating. Do not overheat as this may damage the bottle.
Take extra care when heating in the microwave.
Stir thoroughly with plastic or soft spoon after heating to evenly distribute heat. Allow the standing time recommended by the microwave
manufacturer. Test the temperature before serving.
Beware of very hot glass body after heating.
Do not place bottle in heated oven.
Feel Good – Premium Glass Bottle
This product meets the requirements of European Standard EN 14350.
Instruction for use:
Clean before first and each use.
Before first use place all components separately in boiling water for 5 minutes. This is to ensure hygiene.
Check all components before each use and throw away at the first sign of weakness, cracks or glass fragments inside and outside the
bottle.
To ensure proper cleaning/sterilising all bottle parts MUST be disassembled.
Cleaning/sterilising while assembled can damage the bottle itself or the plastic components.
Clean the bottle thoroughly before sterilising.
Dishwasher safe on top dishwasher rack (max. 65° C) but food colourings may discolour plastic components.
Do not place glass bottle on the top rack of the MAM microwave steriliser as the weight of the bottle could deform the rack.
Do not use abrasive cleaning agents or any metal utensils for cleaning or stirring contents. This can damage the glass and/or the printing.
Only soft bristle brushes or soft sponges should be used to avoid damaging the glass and/or the printing.
Sterilising using one of the following methods: steam sterilising (electric or microwave according to manufacturers instructions), boiling in
water for at least 5 minutes or liquid sterilising solution.
Do not leave items standing in any cleaning solution for longer than recommended – this could negatively affect the product function.
Sudden temperature changes can cause glass bottles to crack or break.
Do not leave glass bottles in boiling water unattended as glass can be damaged through uncontrolled impact with the pot or other glass
components. We recommend boiling the glass body separately.
The bottle is made of natural glass which is hygienic, easy to clean and relatively fragile. Avoid putting heavy pressure on it, as the glass
bottle could break.
Do not use pin or sharp object to enlarge feeding hole of the teat.
When first used and sometimes during use, the ventilation slit (in the raised bubble on the underside of the teat base) can stick together.
This will prevent air from entering the bottle during feeding and as a result, cause the teat to collapse. Slowly brush over the bubble
(ventilation) a few times with your thumb or fingers to re-open the slit.
Store teats in a dry sealed container.
Do not leave individual bottle parts in direct sunlight or heat as this may affect the product function.
Use sugar free food or liquids only.
Do not let children feed themselves with a glass bottle.
To avoid injury, do not let children walk with a glass bottle.
Do not put your baby to bed with bottle. Prolonged contact with liquids may cause severe tooth decay.
Always use only MAM teats with the MAM bottles.
The bottle teat fits all MAM wide neck bottles and the Trainer.
Insert teat into top of bottle screw ring until you hear a “click“.