Cleaning)
▪
Sterilise all parts: Place in boiling water for 5 minutes. This is to ensure
hygiene.
Cleaning:
▪
Before first and each use, clean in warm soapy water and rinse well with
clean water before sterilising.
▪
Inspect all individual bottle parts before each use and pull the feeding
teat in all directions. Replace at the first signs of damage or wear.
▪
To ensure proper cleaning, all bottle parts MUST be disassembled.
Cleaning while assembled can damage the bottle.
▪
Dishwasher safe on top dishwasher rack (max. 65° C / 149 °F) but food
colourings may discolour components.
▪
Do not use abrasive cleaning agents. Only soft bristle brushes or soft
sponges should be used. Hard scourers may scratch the plastic.
Sterilising:
▪
To ensure proper cleaning/sterilising all bottle parts MUST be
disassembled.
▪
Clean all bottle parts before sterilising.
▪
After cleaning, sterilise using one of the following methods: steam
sterilizing (electric or microwave according to manufacturer’s
instructions), boiling in water for at least 5 minutes or immersing in a
liquid sterilising solution.
▪
Do not leave parts longer standing in sterilising solution for longer than
recommended
–
this could negatively affect the product function.
▪
NEVER assemble bottle parts when sterilising or self-sterilising. This can
damage the bottle and distort the threads where the bottle screws
together.
Self-sterilising function of Easy Start in the Microwave:
The self-sterilising function of the Easy Start is proven to be effective for killing
common household germs and bacteria. This method is completely sufficient and
safe. For the best results, please follow all instructions carefully and use only as
directed. This practical and time-saving function can be achieved in 5 simple
steps. Always thoroughly clean individual bottle parts before beginning this
process!
Step 1:
After cleaning, assemble bottle parts as follows: base with silicone valve,
teat with screw ring, bottle body and protective cap.
Step 2:
Measure 20 ml of cool water using the bottle cap. Fill the base with
silicone valve with 20 ml of cool water.
Step 3:
Place the screw ring with teat in the bottle base. Place the bottle body on
it. Screw in JUST SLIGHTLY to avoid pouring out hot water when removing the
bottle from microwave. DO NOT SCREW DOWN FULLY. Place the protective
cap on top.
Step 4:
Set the microwave timer according to the number of bottles being
simultaneously cleaned. Set microwave from 500 to 1000 Watts.
Step 5:
After self-sterilising allow bottle to cool down before removing from
the microwave. Recommended cooling time: at least 10 minutes at opened
microwave door. Be careful to hold the base and keep holding the bottle up
straight when removing from the microwave to avoid spilling any leftover hot
Summary of Contents for 439
