leakage.
•
Now correctly place the valve membrane with the valve body onto the funnel
adapter.
•
Screw the bottle onto the funnel adaptor tightly.
3.1.2. Preparing for pumping
•
Wash your hands with soap and your breasts and nipples with a warm
washcloth and clean fresh water.
•
Squeeze a little bit of milk out of each nipple to make sure the milk ducts are
not clogged.
•
Ensure all parts are clean before use.
•
Before using, make sure that the pump is properly assembled and fully screwed
onto the bottle.
•
Sit comfortably and lean forward slightly. Place a glass of water within easy
reach.
•
Place the funnel firmly on your breast. Make sure no air escapes through the
side, otherwise no suction will develop.
•
Support the breast with your hand from below and hold the funnel onto your
breast with your thumb and index finger.
•
Expressing milk without using the silicone inlay is more effective than with the
silicone inlay. So you may want to remove the inlay once you become more
comfortable with expressing.
3.1.3. Pumping
•
Use your other hand for pumping.
•
Hold the adaptor neck with your thumb and the handle with your remaining
fingers.
•
Press and release the handle to operate the pump at a speed of approximately
60 times per minute. Only squeeze the handle as far as it remains comfortable
and adjust the speed to your personal preference.
•
We recommend a faster pump rhythm to stimulate milk flow.
Once the milk starts flowing, you can switch to a slower rhythm.
•
Try to pump consistently to keep the milk flow established.
Expressing milk or stimulating does not come easily to everyone. If you find it is
less comfortable than you had hoped, ask your midwife or other healthcare
professional for advice.
3.2. Use in combination with the MAM Storage Solution
•
Remove the Easy Start base with its silicone valve and screw the Storage
Solution on in its place. This unit can now be screwed onto the pump. All sizes of
Easy Start bottle can be used in this way.
•
Bring the pump to the breast and express. Please refer to the instructions for
manual pumping above.
•
Unscrew the Storage Solution and close securely with the lid.
• To label with the date and time of expression, use the special two
-part area on
the Storage Solution. A pencil is best.
4. Storing and warming breast milk
4.1. Storage
• Expressed breast milk can be stored either in the MAM Easy Start bottle or in
the Storage Solution.
Summary of Contents for 439
