3
How this type of printer Works
An LCD based resin printer uses an LCD screen to mask the shape of a layer of your
model one layer at a time while using UV lights to cure the resin. Between layers, the
printer will lift the print and return it one layer higher than previously. This process is
repeated layer by layer to shape the object over time.
Safety Warnings And Guiding
• This 3D Printer includes moving parts that can cause injury. Do not touch the drive
parts during printing in case of your hand is pressed.
• Do not leave the printer alone. Wear gloves when you operating this device.
• Do not expose the printer under the sun or in the rain.
• The suitable ambient temperature is 15°-30°, humidity range is 20%-50%.
• Install the power supply unit before connecting the power cord to the AC outlet.
• Connect the printer to an input electrical network of 110~240V AC, 50/60Hz, with an
operating voltage of 12V.
• Check the circuit before printing, cut off the power supply when it’s emergency,
remember to turn off the printer before unplug the power cord.
• This device is intended for indoor use only.
• Operate the machine in stable and level surface with enough space.
• Set the machine far away from the light, and operate the machine as far as in the
dark.
• When any resin or liquid is found inside of the machine, please clear it immediately.
• Clean your skin immediately if it touches with resin.
• Clean the resin box after printing.
• Keep the printer and all accessories out of reach of children.