16
After importing the model, you can add support as needed.
Click the
to open the support option,
click where you need to add the
support,then the support can automatically generate.
The other two buttons are
(bottom support) and
(automatic support).
The thickness of support can be adjusted, the top must not be less than 0.25MM, the
root not less than 0.6MM.
If you model by using PRO/E and CREO, FRONT face is the "bottom" of the model
instead of TOP.
The imported model may differ in size and location from the print area and can be
adjusted by the property bar on the right side of the control center.
Among the above function, "Move (mm)" comes with three small features, you can
easily locate the model quickly.
These three functions are “Fit the base” (hope that you press the button before each
cut, because some models are not fit the base); "XYZ axis absolute in the middle" and
"model in the middle".