Malyan MA10, User Manual, Page: 8 / 15

8
10. Using the same procedure, set the Bed temperature to the target temperature
for your filament type.
11. Rotating the control wheel counterclockwise to move the highlight to Control,
press the center of control wheel to back to the previous menu.
12. While the printer is heating, open your filament. Using a pair of scissors or side
cutters, diagonally snip the end of the filament to make a point, as shown in the
images below.
13. Place the filament reel on the filament rack on
the left side of the printer.
14. While squeezing the lever on the Feed
Mechanism, insert the filament and push it into
opening. Keep pushing until you feel resistance
as it hits the extruder. Release the lever on the
Feed Mechanism.
15. Rotating the control wheel clockwise to move
the highlight to Print from SD . The printer will
read the contents of the memory card and
display them on screen. Rotating the control
wheel to choose the file to start printing the
model.
16. When the printing is in progress, compare the first layer with the images in the
table below to determine whether the build platform needs to be leveled or not. If
it does need adjustment, please rotating the screw on the bottom of four corners
of the platform.