Malyan MA10, User Manual, Page: 7 / 15

7
SETUP
Perform the following steps to prepare the printer for use.
1. Put the printer on a flat, stable surface with plenty of ventilation and a nearby AC
power outlet.
2. Ensure that the power switch is in the OFF position. Plug the included AC Power
Cable into power jack on the right side of the printer, then plug the other end into
a nearby AC power outlet.
3. Power on the printer and insert the included
memory card into the slot on the right side of the
LCD module, the main menu will display on the
screen.
4. Press the center of control wheel and the contents
as the following picture will display on the screen.
Please rotating the control wheel clockwise to
choose the
Change SD card if No SD card show
on the screen instead of Print from SD .
5. Rotating the control wheel clockwise to move the
highlight to Prepare , press the center of control
wheel to enter the menu.
6. Rotating the control wheel clockwise to move the
highlight to Auto home , the printer will move the
extruder to the home position automatically.
Check the distance between nozzle and platform,
if it is incorrect, please rotating the screw on the
bottom of four corners of the platform to adjust
the height of platform.
7. Rotating the control wheel counterclockwise to
move the highlight to Main, press the center of
the control wheel to back to the previous menu.
Rotating the control wheel clockwise to move the
highlight to the Control and press the center of
the control wheel to enter the menu.
8. Rotating the control wheel clockwise to move the
highlight to Temperature, and press the center of
the control wheel to enter the menu.
9. Rotating the control wheel clockwise to move the
highlight to Nozzle and press the center of control
wheel to enter the menu, Rotating the control wheel to set the temperature of the
nozzle to your target value, it depends on the filament you plan to use. After you
set up your target value, press the center of control wheel to save the data and
exit.