- 34 -
but makes it harder to remove.
1.17 Black Magic
This section allows you to transform your model into a hollow shell, a single
layer thick. Spiralize the outer contour this causes your Z axis to be
constantly moving upward as printing your single outer wall shell. The
results are no layer change lines, giving a much smoother surface. This
setting is typically only used for artistic objects as they will be fragile.
Only Follow Mesh Surface
This will cause your print to follow the outside of your model, building it
completely hollow with a single wall outer shell. The only difference
between this and spiralize, is that the Z axis moves regularly. That is, it
prints a layer and then moves up to the next one.
1.18 Brim
Brim circles the base of the print while making contact, helping adhere the
print to the heated plate. This is only one layer thick, and easily removed
post-print. This section defines how the brim is formed when brim is
activated in basic setting.
