MALTEC MasterHedge-PRO620W Instruction Manual Download Page 14

Remove the plug immediately if the cable or extension cord has been damaged or 
cut. - Keep electrical cables away from the working area and make sure to have the 
cable always behind your back.

Always   wear   suitable   clothing   anti-slip   shoes   and   close-fitting   garments   which 
cannot get caught however do not restrict movement. Tie long-hair back or protect 
with a hair net. Do not wear bracelets or long jewellery which could get entangled in 
moving parts.

Always wear safety goggles or a face guard, protective gloves and if the noise 
exceeds 85dB (A) also wear ear guards.

Do not use the machine when it is raining or on wet hedges.

Individuals who are not perfectly familiar with the instruction are not allowed to use 
the machine

Within   the   working   area,   the   person   using   the   machine   is   responsible   for   any 
damage or injury sustained by third parties or their property which has been caused 
by the machine. Watch your working area and do not allow third persons or animals 
to be around.

When operating the machine take great care and always hold it firmly with both 
hands. Chose a stable and safe position especially on steps

Check   regularly   that   all   screws   are   properly   secured.   Check   the   cutting   blades 
regularly and in case of damage have them repaired or exchanged by an authorized 
service center.

Make yourself familiar with your working area and be alert for possible hazards 
which you might not her due to the motor noise.

Never touch the unprotected blades and never carry the machine taking hold of the 
blades. 

When the hedge trimmer is not in use for transport or storage, keep it in a dry place 
and out of the reach of children and have the cutting blades always inserted into the 
protection cover.

Only   use   original   spare   parts   and   accessories   supplied   with   the   machine   or 
recommended by the manufacturer.

The blade brake makes the blades stop immediately within 0.2s. The small flash in 
the area of the upper ventilation slots is normal and dose not harm to you or the 
machine. 

General safety instructions 

WARNING!  

When   using   electric   tools   basic   safety   precautions   including   the   following 

should always be followed to reduce the risk of fire, electric shock and personal injury. 
Read all these instructions before operating this product and save these instructions. 

Keep work-area clean 

Cluttered area and benches invite injuries. 

Consider work area environment 

Do not expose power tools to rain. Do not use power tools where there is risk to cause fore 
or explosion. 

Guard against electric shock 

Avoid   body   contact   with   earth   or   grounded   surface   (eg.   pipes,   radiators,   ranges,   and 
refrigerators). 

14/ 30

Summary of Contents for MasterHedge-PRO620W































Reviews: