Visit www.MaltaDynamics.com for the latest user instruction manual
revision for this product offering as well as supporting documentation
9
GENERAL OPERATION & INITIAL SETUP
Don a full body harness conforms to EN 361 according to the manufacturer’s instructions.
WORKING AREA/USE:
The maximum load that can be transmitted in service from the anchor device to the structure is
13kN in a downward direction. Furthermore, the minimum required strength is 13 kN.
When using the unit, the walking/working surface being accessed by the user must be of a
sufficient height as not to allow any part of a worker’s body to strike an object, or, the next lower
level,
in the event of a fall arrest situation. The XSERIES Mobile Grabber may be used up to 30
degrees off plumb in the East, West and South directions depending upon model and anchor
points being used so long as the user cannot strike an object or the next lower level in a fall
arrest. Please see diagrams below: