Part Number
Comments
Inspector Name
Date
MODEL NUMBER:
DATE OF MANUFACTURE:
Inspection:
Official periodic inspection must be made at least annually. The inspection must be performed by a qualified
person other than the intended user. If severe weather or conditions exist then inspections must be carried
out more frequently. All inspection results must be logged in the space provided above.
1.
Inspect swivel to make sure it is flush with mounting surface.
2.
Make sure all labeling is affixed to the unit.
3.
Make sure the unit can rotate 360° and D-ring can flip from side to side.
4.
When reusing a previously drilled hole, inspect for for debris or wallowing.
5.
Record inspection results in the space provide above.
*If any damage that could affect the strength or operation of the device, or unsafe condi-
tions are found, proper disposal is required. The anchorage connector must be rendered
unusable and then properly discarded.
MAINTENANCE, CLEANING AND STORAGE
Cleaning periodically will prolong the life and proper functioning of the product. The frequency
of cleaning should be determined by inspection and by severity of the environment. Clean with
compressed air and/or a stiff brush using plain water or a mild soap and water solution. Do not use
any corrosive chemicals that could damage the product. Wipe all surfaces with a clean, dry cloth
and hang to dry, or use compressed air. When not in use, store anchorage connectors in a cool, dry,
clean environment, out of direct sunlight and free of corrosive or other degrading elements.
INSPECTION AND MAINTENANCE LOG
Malta Dynamics
210 13th Street, Malta, OH 43758
(800) 494-1840 / www.maltadynamics.com
Product Warranty, Limited Remedy and Limitation of Liability
WARRANTY: THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
Equipment offered by Malta Dynamics is warranted against factory defects
in workmanship and materials for a period of one year from date of purchase or first use by the original
owner.
LIMITED REMEDY:
Upon notice in writing, Malta Dynamics will repair or replace all defective items at Malta
Dynamics’s sole discretion. Malta Dynamics reserves the right to require that the defective item be returned
to its plant for inspection before determining the appropriate course action. Warranty does not cover
equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other
damage beyond the control of Malta Dynamics. Malta Dynamics shall be the sole judge of product condition
and warranty options. This warranty applies only to original purchaser and is the only warranty applicable to
this product. Please contact Malta Dynamics technical service department for assistance.
LIMITATION OF LIABILITY: IN NO EVENT WILL MALTA DYNAMICS BE LIABLE FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO LOSS OF
PROFITS, IN ANY WAY RELATED TO THE PRODUCTS REGARDLESS OF THE LEGAL THEORY ASSERTED.
