background image

WARNING LABEL LOCATIONS

  

  

WARNING: It is essential to the safety of the end user that the seller of this device 

include all instructions pertaining to the proper use, maintenance and inspection of 

the device in the language of the country in which the product is to be sold.

BREAKING STRENGTH: 5000 lbf (22.2 kN)

MFG: MM/YYYY

WARNING: All persons using this equipment must read, understand and follow 

all instructions.  Failure to do so could result in serious injury or death.

1(800) 494-1840

Beam Anchor Model: A6104

IB30B

-XXX

MFD: MM/

YYYY

INSPEC

T BEFORE USE

Compliance: OSHA 1926.502, OSHA 1910.66, ANSI Z359.18 Type A, ANZI Z359.7(11)

WARNING:

 

ALL  PERSONS  USING  THIS  EQUIPMENT  MUST 

READ  AND  UNDERSTAND  ALL  INSTRUCTIONS.  FAILURE TO  DO 

SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD 

BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS 

EQUIPMENT. ALL INDIVIDUALS WHO USE THIS PRODUCT MUST 

BE PROPERLY INSTRUCTED ON HOW TO USE THE DEVICE. AVOID 

CONTACT  WITH  PHYSICAL  HAZARDS  (THERMAL,  CHEMICAL, 

ELECTRICAL, ETC.). MAKE ONLY COMPATIBLE CONNECTIONS.

Patent # US 8,312,966 / US 8,353,653

Summary of Contents for A6104









Reviews: