INSTRUCTIONS FOR SAFE USE OF
WNL+ LAPTOP TROLLEY
1 z 3
Manufacturer: MALOW Sp. z o. o., st. Wojska Polskiego 114A, 16-
400 Suwałki
Purpose
: The WNL+ soft-start trolley is intended to store and charge Laptop/Notebook computer
hardware:
Terms of use:
1. The appliance may be used by children over 8 years old and by persons with reduced physical,
sensory or mental capacities, or who lack experience or knowledge, on condition that they are
under supervision or after they have received instructions concerning the safe use of the appliance
and the understanding of the dangers involved. Children must not play with the appliance. Cleaning
and maintenance intended to be carried out by the user must not be performed by children without
supervision.
2. If detachable connection cable seems broken, it should be replaced by the manufacturer, service
agent or similarly qualified persons.
3. In case of any damaged sockets, cords or body disconnect locker form power supply and stop using
it intermediately.
4. Any repairs should only be carried out by the manufacturer's service department or by qualified
personnel. It is forbidden to make any changes in the electrical connections placed in the product.
5. Before closing the door, make sure that there are no animals inside the product.
6. In order to avoid excessive interference and minimize the risk of failure of the connected devices,
only dedicated original power supplies should be used.
7.
Defective li-ion and li-po batteries may explode at high temperatures and cause fire.
8.
The cabinet can heat up from power supplies and charged laptop power cells.
9. Maintenance and servicing of the cabinet must be carried out with the power supply disconnected.
Do not use highly corrosive detergents to clean the cabinet. Clean with a dry or slightly damp cloth.
10. Move the trolley after disconnecting the cables from the power supply system, before moving, make
sure that all doors closed and brakes released. (item 6). Set the trolley on level ground and secure
by applying wheel brakes.
11. With detachable cable plug the IEC plug (item 2) into the trolley socket (item 1).
12. Connect the plug of the connecting cable (item 2) to a power supply system equipped with
overcurrent protection and a residual current device with rated
residual current ≤ 30mA and to
sockets with a PE protective contact.
Model
WNL
Numer o
f
co
lumns
Numbe
r o
f
so
cke
ts
a
n
d
sh
e
lves
Rou
te
r-
R*
S
wi
tch
-S
**
Cho
o
se
n
m
o
d
e
l
110
1
10
208
2
16
210
2
20
213
2
26
310
3
30
