19
EN
INSERTING BATTERIES
Inserting the batteries into the
microphone and transmitter:
Slide open the battery
compartment cover, insert the
supplied batteries into the battery
compartment, observing the
polarity, and close the cover again.
TIPS FOR ACHIEVING OPTIMAL PERFORMANCE
• Make sure that you can always see one of the receiving antennas from the
transmitting position.
• Keep the distance from the transmitter to the receiver as short as possible.
• Set the receiving antennas at an angle of 45° from vertical.
• Make sure that the receiving antenna is not near any metal surfaces.
• Check the battery level and replace the batteries when the red lamp lights
up.
• When using the receiver on a rack or a PA system, make sure that the
antennas do not touch or cross each other.
• Test the system out before a demonstration or presentation. If there are
any radio holes, change the location of the receiver. If the dead spots still
remain, mark them and work around them.
Summary of Contents for 10010793
Page 2: ......
